Boss WL-50

WIRELESS FREEDOM FOR PEDALBOARDS
With the WL-50, it’s never been easier to bring wireless freedom to your pedalboard. Driven by new BOSS technology, the WL-50 delivers premium sound and a plug-and-play experience that eliminates all the hassles normally associated with wireless systems. The stompbox-sized receiver fits right alongside your other pedals, and includes a docking port for charging the transmitter and automatically setting the best wireless connection. There’s even a handy DC output, allowing you to distribute power to multiple pedals on your board.

Once you experience the wireless independence provided by the WL-50, you’ll never go back to using a standard cable again! Setup is quick and simple, and you’re able to move about freely while playing at home, jamming with friends, and performing on stage. During sound check at a gig, you can listen to your tone out front and dial in the best sound for your audience. And with the ability to roam and interact with other musicians, your live shows will be more dynamic and entertaining than ever.

SPECIFICATIONS (RECEIVER)
Wireless Format: BOSS proprietary digital audio format
Wireless carrier frequency: 2.4 GHz
Compatible Channels: 14 (May vary due to local conditions)
Transmission Range: 65 feet line-of-sight (May vary due to local conditions)
Latency: 2.3 ms
Dynamic Range: 110 dB or greater
Frequency Response: 20 Hz--20 kHz
Nominal Input Level: -10 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -10 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Controls: CABLE TONE switch (OFF/SHORT/LONG)
Indicators: POWER, RECEIVE
Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, TRANSMITTER jack: 1/4-inch TRS phone type, DC IN jack, DC OUT jack
Power Supply: Alkaline battery (AA, LR6) x 2, AC adaptor (sold separately)
Current Draw: During wireless operation: 60 mA. While charging: 320mA
Expected battery life under continuous use: Alkaline battery (AA, LR6): Approximately 10 hours
Accessories: Owner's Manual, Leaflet USING THE UNIT SAFELY, Transmitter, Rubber foot x 4, Alkaline battery (AA, LR6) x 2

An AC adaptor (PSA-S series) is required to charge the transmitter (WL-T).

SIZE AND WEIGHT(RECEIVER)
Width: 72 mm
Depth: 121 mm
Height: 56 mm
Weight (including battery): 220 g

SPECIFICATIONS (TRANSMITTER (WL-T))
Nominal Input Level: -10 dBu (1 M ohm)
Indicator: BATTERY
Connectors: Input plug: 1/4-inch TRS phone type, DC IN 5 V port: USB Micro-B type
Power Supply: Rechargeable lithium-ion battery, supplied from the DC IN 5 V port
Current Draw: 350mA
Battery charging time: Approximately 3 hours
Expected battery life under continuous use: Approximately 12 hours

SIZE AND WEIGHT (TRANSMITTER (WL-T))
Width: 87 mm
Depth: 22 mm
Height: 36 mm
Weight: 43 g